Bacterial Cellulose Membranes Research Articles

Functionalizable bacterial cellulose composite membrane for guided tissue regeneration

This research aims to develop guided tissue regeneration (GTR) membranes from bacterial cellulose (BC), a natural polysaccharide-based biopolymer. A double-layered BC composite membrane was prepared by coating the BC membrane with mixed carboxymethyl cellulose/poly(ethylene oxide) (CMC/PEO) fibers via electrospinning. The CMC/PEO-BC membranes were then characterized for their chemical and physical characteristics. The 8 % (wt/v) CMC/PEO (1:1) aqueous solution yielded well-defined electrospun CMC/PEO nanofibers (125 ± 10 nm) without beads. The CMC/PEO-BC membranes exhibited good mechanical and swelling properties as well as good cytocompatibility against human periodontal ligament cells (hPDLs). Its functionalizability via carboxyl entities in CMC was tested using the calcium-binding domain of plant-derived recombinant human osteopontin (p-rhOPN-C122). As evaluated by enzyme-linked immunosorbent assay, a 98–99 % immobilization efficiency was achieved in a concentration-dependent manner over an applied p-rhOPN-C122 concentration range of 7.5–30 ng/mL. The biological function of the membrane was assessed by determining the expression levels of osteogenic-related gene transcripts using quantitative real-time reverse-transcriptase polymerase chain reaction. Mineralization assay indicated that the p-rhOPN-C122 immobilized CMC/PEO-BC membrane promoted hPDLs osteogenic differentiation. These results suggested that the developed membrane could serve as a promising GTR membrane for application in bone tissue regeneration.

Characterization of Bacterial Cellulose Produced by the KomEt Strain Isolated from a Kombucha SCOBY

Bacterial cellulose (BC) is gaining interest, due to its actual and potential applications in the biomedical, cosmetics and textile industries. In this study, mechanical, thermal, and chemical properties of BC produced from a novel strain, isolated from a kombucha symbiotic culture of bacteria and yeast (SCOBY), were evaluated. The highest obtained yields with this strain, after a 10-day fermentation, were 496 ± 14 g/L (native hydrated) and 19 ± 1 g/L (dry). Compression, including relaxation, and traction tests were performed on BC membranes in a hydrated state. The tested material revealed a 3-phase compression behaviour with a compression modulus of 235 ± 50 Pa. In terms of relaxation in water, BC membranes showed plastic deformation past 50 % compression. Regarding BC membrane under traction, analysis showed a 1090 ± 410 kPa Young Modulus, a 50 ± 10 % elongation at break and a 270 ± 80 kPa Ultimate Tensile Stress (UTS). Thermal gravimetric analysis (TGA) and differential scanning calorimetry (DSC) indicated that BC begins its degradation around 290°C. Fourier-Transform Infrared spectroscopy (FTIR) of freeze-dried BC membranes confirmed the obtained biofilm to be BC. The results of this study provide valuable information on the potential applications of BC membranes in different industries including textile, biomedical and as a low-cost alternative to some synthetic polymers.

Study of the structure and characterization of membranes reinforced with CuO-NPs/Graphene Oxide using bacterial cellulose extracted from Sargassum sp. for water nanofiltration system

Bacterial cellulose membranes find extensive applications in industries involving water purification, wastewater treatment, and biomedical uses. Nevertheless, prevailing membranes suffer from drawbacks like water flow hindrances and fouling susceptibility. Hence, the pressing need for more efficient and robust BC membranes. This study aims to assess the impact of a hybrid treatment involving Copper Oxide nanoparticles (CuO-NPs) and Graphene Oxide (GO) on bacterial nanocellulose membranes. The research employed two treatments: (1) control (BNCA), and (2) Bacterial cellulose infused with 0.5 wt% CuO-NPs/GO. The nanocellulose production involved a high-pressure homogenizer, followed by acetate nanocellulose synthesis and nanocomposite membrane functionalization with CuO nanoparticles. SEM, FTIR, and XRD analyses characterized the membranes. Successfully formed seaweed-derived bacterial cellulose had a thickness of 1-3 cm. Characterization showed it belonged to Cellulose type I with a crystalline degree ranging from 82.3% to 83.1%. FTIR analysis of dry BNCA membranes indicated changes in transmittance at 1738, 1554, and 764 cm-1 due to CuO-NPs/GO addition, altering the O-H bond in bacterial cellulose. Based on the results of the above research, it is evident that the Membrane Reinforced with CuO-NPs/Graphene Oxide has been successfully developed and holds potential as a water nanofiltration system.

The application of cellulosic‐based materials on interfacial solar steam generation for highly efficient wastewater purification: A review

AbstractThe world's population is growing, leading to an increasing demand for freshwater resources for drinking, sanitation, agriculture, and industry. Interfacial solar steam generation (ISSG) can solve many problems, such as mitigating the power crisis, minimizing water pollution, and improving the purification and desalination of seawater, rivers/lakes, and wastewater. Cellulosic materials are a viable and ecologically sound technique for capturing solar energy that is adaptable to a range of applications. This review paper aims to provide an overview of current advancements in the field of cellulose‐based materials ISSG devices, specifically focusing on their applications in water purification and desalination. This paper examines the cellulose‐based materials ISSG system and evaluates the effectiveness of various cellulosic materials, such as cellulose nanofibers derived from different sources, carbonized wood materials, and two‐dimensional (2D) and 3D cellulosic‐based materials from various sources, as well as advanced cellulosic materials, including bacterial cellulose and cellulose membranes obtained from agricultural and industrial cellulose wastes. The focus is on exploring the potential applications of these materials in ISSG devices for water desalination, purification, and treatment. The function, advantages, and disadvantages of cellulosic materials in the performance of ISSG devices were also deliberated throughout our discussion. In addition, the potential and suggested methods for enhancing the utilization of cellulose‐based materials in the field of ISSG systems for water desalination, purification, and treatment were also emphasized.

Bacterial cellulose membrane SERS substrate for in-situ reduction of gold nanoparticles for detecting TNF-α

In this study, we developed a two-dimensional bacterial cellulose nanogold substrate via in situ reduction and utilized a sandwich model with 4-MBN as a Raman reporter for sensitive detection of TNF-α. TNF-α, a critical cytokine in various diseases, was detected in a broad range (10−8 to 10−4 mg/mL) with a remarkable detection limit of 0.35 pg/mL. The assay exhibited excellent specificity, with a 98 % recovery rate for serum samples at 5 × 10−7 mg/mL. This method shows promise for precise TNF-α determination in complex samples, suggesting its potential for diagnostic and research applications.

Investigation of anti-adherence and antimicrobial properties of prodigiosin-functionalized bacterial cellulose membrane for biomedical applications

In this study, novel biomaterial that consisted entirely of bacterial products was developed with the approach of designing cost effective material for biomedical applications. With this aim, bacterial cellulose membranes (BCMs) which synthesized by Komagataeibacter intermedius were produced. Moreover, to impart antimicrobial properties to enhance the capacity of BCMs for biomedical usage, prodigiosin (PG) pigment of Serratia marcescens which presents wide range of antimicrobial activities was loaded to BCMs. Firstly, high yield of PG production was achieved, and then crude pigment was purified with silica gel column. The purified PG was characterized with thin layer chromatography and UV–visible spectrometry. The antimicrobial effect of the produced pigment on Gram-positive and negative bacteria and a yeast was investigated. The success of modification in PG-modified BCMs has been demonstrated by FTIR and SEM. Moreover, antimicrobial and antiadhesive ability of novel PG-BCMs were examined with disc diffusion and plate counting methods. As a result, it was established that PG-BCMs were able to inhibit the growth of all tested microorganisms. Furthermore, excellent antiadhesive effect was observed for the tested microorganisms with the inhibition rates of 82.05–96.25 %. Finally, cytotoxicity test with L929 cell line demonstrated that PG-BCM is biocompatible at a level that can be applied in in vivo studies.

Reversible Deacidification and Preventive Conservation of Paper-Based Cultural Relics by Mineralized Bacterial Cellulose.

Paper-based cultural relics experience irreversible aging and deterioration during long-term preservation. The most common process of paper degradation is the acid-catalyzed hydrolysis of cellulose. Nowadays, deacidification has been considered as a practical way to protect acidified literature; however, two important criteria of minimal intervention and reversibility should be considered. Inspired by the superior properties of bacterial cellulose (BC) and its structural similarity to paper, herein, the mineralized BC membranes are applied to deacidification and conservation of paper-based materials for the first time. Based on the enzyme-induced mineralization process, the homogeneous and high-loaded calcifications of hydroxyapatite (HAP) and calcium carbonate (CaCO3) nanoparticles onto the nanofibers of BC networks have been achieved, respectively. The size, morphology, structure of minerals, as well as the alkalinity and alkali reserve of BC membranes are well controlled by regulating enzyme concentration and mineralization time. Compared with HAP/CaCO3-immersed method, HAP/CaCO3-BC membranes show more efficient and sustained deacidification performance on paper. The weak alkalinity of mineralized BC membranes avoids the negative effect of alkali on paper, and the high alkali reserve implies a good sustained-release effect of alkali to neutralize the future generated acid. The multiscale nanochannels of the BC membrane provide ion exchange and acid/alkali neutralization channels between paper and the BC membrane, and the final pH of protected paper can be well stabilized in a certain range. Most importantly, this BC-deacidified method is reversible since the BC membrane can be removed without causing any damage to paper and the original structure and fiber morphology of paper are well preserved. In addition, the mineralized BC membrane provides excellent flame-retardant performance on paper thanks to its unique organic-inorganic composite structure. All of these advantages of the mineralized BC membrane indicate its potential use as an effective protection material for the reversible deacidification and preventive conservation of paper-based cultural relics.

The production of bacterial cellulose from coconut water and its application as a green photocatalyst composite membrane

AbstractIn this research work, bacterial cellulose was produced from the fermentation of coconut water and incubated for 4, 5, and 6 days. The bacterial cellulose membrane was utilized as immobilized silver nanoparticles (AgNPs). A green photocatalyst membrane was prepared by reducing silver ions in the bacterial cellulose matrix structure using local fruit extracts, tomatoes, Citrus hystrix fruit, and mangosteen peel as a reducing agent. The composite was dried in the oven to obtain a more durable fixed structure. The properties of produced bacterial cellulose were determined by measuring the thickness, water retention capacity (WRC), cellulose content, and swelling. The functional group and crystallinity index of bacterial cellulose were observed by FTIR and XRD instrument analysis. The SEM EDX analysis confirms that the silver ions were successfully reduced in the BC matrix, and the UV–Vis spectrum showed that the composite membrane has the ability to degrade the methylene blue solution under sunlight irradiation. The maximum degradation efficiency of the composite membrane against 5 ppm methylene blue solution was achieved by the composite membrane reduced by tomatoes, with a value of 93%. This result proved that the composite membrane produced in this research has excellent capabilities as a green photocatalyst for degrading wastewater containing dye pollutants.

Fabrication of porous bone scaffolds using degradable and mouldable bacterial cellulose

Bacterial cellulose (BC) is a biomaterial extensively studied in tissue engineering due to its favorable properties. Porosity, biocompatibility, biodegradability and mechanical durability are essential material properties for scaffold use in tissue engineering. This study aims to fabricate porous scaffolds using a moldable and degradable BC-HAp composite for bone tissue engineering. BC was produced by Komagataeibacter sucrofermentans under static culture conditions. The harvested BC membranes were purified and then mechanically shredded. BC oxidation was performed using different sodium periodate concentrations (0.05–0.5 M) and treatment times (0.5–12 h). Oxidized BCs (oxBC) were modified with hydroxyapatite (HAp), then were moulded, lyophilized, and characterized. The degradability of the scaffolds was determined for 45 days. Cytotoxic analysis of oxBC scaffolds was carried out for 7 days using the L929 fibroblast cell line. The oxidation degrees of the shredded BC samples were between 6.75 and 81%, which increased in line with the increasing concentration and application time of periodate. The scaffolds prepared using oxidized cellulose for 30 and 60 min (oxBC30 and oxBC60) preserved their integrity, These scaffolds showed a weight loss of 9% and 14% in 45 days, respectively. The pore distribution was between 50 and 450 µm and concentrated in the 50–150 µm range. The compression moduli were 88.72 kPa and 138.88 kPa for oxBC30-HAp and oxBC60-HAp, respectively. It was determined that oxBC did not show a significant difference in cell viability compared to the control groups and was not cytotoxic. In conclusion, degradable and more porous bone scaffolds were fabricated using mouldable oxBC.

Metal-Free, Bio-Triboelectric Nanogenerator Based on a Single Electrode of Bacterial Cellulose Modified with Carbon Black

Developing metal-free electrodes for prototypes of bio-based devices is an essential step in producing non-toxic components for implantable devices and wearables. In particular, the advancement in self-powered devices is a hot topic for several applications due to the possibility of creating free-battery devices and sensors. In this paper, the modification of bacterial cellulose by the progressive incorporation of carbon black (a conductive filler) was explored as a prototype for bio-based electrodes for triboelectric nanogenerators. This process was controlled by the percolation pathways’ activation through the contact of carbon black grains with the bacterial cellulose membrane, which represents a critical step in the overall process of optimization in the power output performance, reaching an open circuit voltage value of 102.3 V, short circuit current of 2 μA, and power density of 4.89 μW/cm2.

Exploring Bacterial Cellulose and a Biosurfactant as Eco-Friendly Strategies for Addressing Pharmaceutical Contaminants.

Aquatic environments face contamination by pharmaceuticals, prompting concerns due to their toxicity even at low concentrations. To combat this, we developed an ecologically sustainable biosurfactant derived from a microorganism and integrated it into bacterial cellulose (BC). This study aimed to evaluate BC's efficacy, with and without the biosurfactant, as a sorbent for paracetamol and 17α-ethinylestradiol (EE2) in water. We cultivated BC membranes using Gluconacetobacter xylinus ATCC 53582 and synthesized the biosurfactant through pre-inoculation of Bacillus subtilis in a synthetic medium. Subsequently, BC membranes were immersed in the biosurfactant solution for incorporation. Experiments were conducted using contaminated water, analyzing paracetamol concentrations via spectrophotometry and EE2 levels through high-performance liquid chromatography. Results indicated BC's superior adsorption for EE2 over paracetamol. Incorporating the biosurfactant reduced hormone adsorption but enhanced paracetamol sorption. Notably, original and freeze-dried BC exhibited better adsorption efficacy than biosurfactant-infused BC. In conclusion, BC showed promise in mitigating EE2 contamination, suggesting its potential for environmental remediation. Future research could focus on optimizing biosurfactant concentrations to enhance sorption capabilities without compromising BC's inherent effectiveness.

Mono-component bacterial cellulose heterogeneous membrane mediated by ionic liquids for osmotic energy harvesting

The massive reserves of osmotic energy existing in estuary will be highly desired as promising energy source that avails to solve the problem of energy shortage and environment deterioration. The ion transport membrane is core component optimized through composite membrane heterostructure to maximize the osmotic energy harvesting but suffer from gaps and resistance increase, which limit their practical applications. Here we demonstrate mono-component heterogeneous regenerated bacterial cellulose (RBC) membranes fabricated by subtle regenerated technique through Ionic Liquids (ILs). Such membranes obtain heterogeneous nature by the difference in fiber intertwining states due to the different treatment conditions on both sides. It achieves osmotic energy conversion with maximum power density of 0.70 W·m−2at 100-fold, which provides ingenious strategy for excellent performance and low-cost osmotic energy harvesting. By minimizing pores and maximizing the surface charges, energy barriers can be lowered, ion permeable and selective transport channels for energy harvesting device can be increased, as supported by the numerical simulation. This is the first time the construction strategy for mono-component heterogeneous membrane mediated by ILs for osmotic energy harvesting is proposed, which averts gaps between the layers of different materials effectively and provides theoretical guidance for subsequent in-depth research on mono-component ion-selective heterogeneous membrane.

Bacterial Cellulose-Based Bandages with Integrated Antibacteria and Electrical Stimulation for Advanced Wound Management.

Bandages for daily wounds are the most common medical supplies, but there are still ingrained defects in their appearance, comfort, functions, as well as environmental pollution. Here, novel bandages based on bacterial cellulose (BC) membrane for wound monitoring and advanced wound management are developed. The BC membrane is combined with silver nanowires (AgNWs) by using vacuum filtration method to achieve transparent, ultrathin (≈7 µm), breathable (389.98-547.79gm-2 d-1 ), and sandwich-structured BC/AgNWs bandages with superior mechanical properties (108.45-202.35 MPa), antibacterial activities against Escherichia coli and Staphylococcus aureus, biocompatibility, and conductivity (9.8 × 103 -2.0 × 105 Sm-1 ). Significantly, the BC/AgNWs bandage is used in the electrical stimulation (direct current, 600 microamperes for 1 h every other day) treatment of full-thickness skin defect in rats, which obviously promotes wound healing by increasing the secretion of vascular endothelial growth factor (VEGF). The BC bandage is used for monitoring wounds and achieve a high accuracy of 94.7% in classifying wound healing stages of hemostasis, inflammation, proliferation, and remodeling, by using a convolutional neural network. The outcomes of this study not only provide two BC-based bandages as multifunctional wound management, but also demonstrate a new strategy for the development of the next generation of smart bandage.

In situ green synthesis of AgNPs in bacterial cellulose membranes and antibacterial properties of the composites against pathogenic bacteria

In situ green synthesis of AgNPs in bacterial cellulose membranes and antibacterial properties of the composites against pathogenic bacteria

Bacterial cellulose loaded with silver nanoparticles as a flexible, stable and sensitive SERS-active substrate for detection of the shellfish toxin DTX-1.

Diarrheal shellfish toxins are considered one of the most lethal red tide algae toxins in the worldwide. In this work, we propose an Ag NPs-loaded bacterial cellulose membrane (BCM) surface-enhanced Raman scattering (SERS) sensor based on an aptamer (Apt) for the ultrasensitive detection of dinophysistoxin (DTX-1), a type of diarrheal shellfish toxin. During drying, Ag NPs can be further densified on "gel-like" BCM to form high-density SERS "hot spots". We developed the "Apt-SH@Ag NPs@BCM" SERS sensor and used the competition of DTX-1 and complementary base (Cob) in the process of base complementary pairing to achieve SERS detection of DTX-1, with a minimum detection limit of 9.5×10-10mol/L. Sample assays showed DTX-1 recovery rates ranging from 95.8% and 108.2% and the detection results were comparable to those obtained by LC-MS. Therefore, this work holds great potential for detecting of toxic substances in shellfish products, especially for the oyster (portuguese oyster) and mussel (blue mussel).

Paper sludge saccharification for batch and fed-batch production of bacterial cellulose decorated with magnetite for dye decolorization by experimental design

Cellulosic wastes represent a great environmental challenge, with potential conversion to product-added value through microbial fermentation. Currently, bacterial cellulose (BC) is considered a promising natural polymer for multiple applications. However, the high production cost challenges its wide application. Hence, the current study evaluated the applicability of paper sludge as a cost-effective medium for both cellulases and BC production. The local isolate Streptomyces rochei revealed the highest cellulase production titer (about 3 U/mL) at optimized conditions. For BC production, batch and fed-batch fermentation strategies were evaluated using enzymatically hydrolyzed paper sludge. The results asserted the advantage of fed-batch fermentation for advanced BC production (3.10 g/L) over batch fermentation (1.06 g/L) under the same cultivation conditions. The developed BC membranes were characterized through different instrumental analyses, which revealed an increase in fiber diameters and crystallinity under fed-batch fermentation. Furthermore, BC/magnetite (BC/Fe3O4) nanocomposite was developed by an in-situ approach. The newly developed composite was evaluated for dye removal applications, using methyl orange (MO) as a model. The dye removal conditions were optimized through Box Behnken design (BBD), which indicated maximal MO removal (83.5%) at pH 3.0 and BC/Fe3O4 concentration of 0.1 mg/dL after 60 min. Therefore, the current study asserts the good applicability of enzymatically hydrolyzed paper sludge as a medium for cost-effective BC production and the high capacity of BC/magnetite nanocomposite for MO decolorization. The study paves the way for the cost-effective implementation of BC/magnetite nanocomposite for dye removal.Graphical

Fabrication and floating test of an asymmetric supercapacitor based on polyaniline and MXene

Polyaniline (PANI) exhibits considerable capacitance at positive potentials in acidic aqueous electrolytes, making it a highly promising pseudocapacitive material. Nevertheless, the absence of appropriate anode materials capable of effectively functioning at negative potentials in its asymmetric supercapacitors hinders the ability to increase the cell voltage, thereby impacting the specific energy. To address this issue, MXene (Ti3C2Tx) was utilized due to its proven efficacy in mitigating hydrogen evolution at highly negative potentials in acidic aqueous electrolytes. In this study, we fabricated an asymmetric supercapacitor consisting of a PANI nanorod array deposited on bacterial cellulose (BC) membrane and a MXene/carbon nanotube (MXene/CNT) film. The device can operate at a cell voltage of 1.3 V and exhibits exceptional specific energy and specific power (12.1 Wh kg−1/0.4 kW kg1 and 7.9 Wh kg−1/1.7 kW kg−1). It demonstrates excellent cycling performance, with a capacitance retention rate of 96% after 2000 galvanostatic charge/discharge (GCD) cycles. In addition, one practical and reliable approach, the floating test, was applied to assess the stability of this asymmetric supercapacitor. It also maintains 82% of its initial capacitance after 60 h of floating time. Our findings indicate that the combination of PANI and MXene in an asymmetric configuration represents a promising approach for the development of next-generation PANI-based supercapacitors.

Preparation of SERS base membrane with cellulose compound dopamine and determination of hypochlorite.

Flexible silver substrates were made by in situ reduction of silver nanoparticles in bacterial cellulose membranes using the unique advantage of dopamine. Subsequently, we modified the substrate with 4-mercaptophenol (4-MP), a molecule capable of specifically recognizing ClO-, and its corresponding SERS signal changes with the concentration of hypochlorite, thus allowing the quantitative detection of ClO- content. The method showed a negative linear correlation (R2 = 0.9567) with the SERS intensity at 1077cm-1 over the concentration range 0.5-100µM, and the detection limit was 0.15µM. The RSD of the SERS intensity at 1077cm-1 under five batches was 4.2%, which proved the good reproducibility of P-BCM-Ag NP-MP. Finally, the P-BCM-Ag NPs were used for the detection of hypochlorite in cell contents, artificial urine, and clinical serum samples, utilizing spikeexperiments in all three environments. The recoveries were in the range 90-110% indicating the accuracy of the method for the detection of hypochlorite and validating the promising application of this assay for practical detection in intricate biological samples.

Determination of H2O2 and its antioxidant activity by BCM@Au NPs ratiometric SERS sensor

As a reactive oxygen species (ROS), excessive production of H2O2 contributes to the development of several diseases such as, inflammation, cancer, and respiratory diseases. Supplementation with endogenous or exogenous antioxidants can scavenge ROS and reduce the oxidation of cellular molecules, thus alleviating the generation of diseases. Therefore, the determination of H2O2 content and its antioxidant activity is of great importance in disease diagnosis and treatment. In this paper, a ratiometric SERS sensor with a flexible cellulose membrane was designed for quantitative detection of H2O2 and assessment of antioxidant activity. First, gold seeds were reduced on bacterial cellulose membrane (BCM) and Au NPs were smoothly deposited on the bacterial cellulose membrane (BCM) using halides to reduce the reduction potential in the growth solution to form a flexible BCM@Au NPs SERS substrate. Afterwards, the oxidation of H2O2 was used to convert 3-mercaptophenylboronic acid (3-MPBA) to the corresponding phenol form 3-hydroxyphenylethanol (3-HTP). The change of substance resulted in a good linear relationship between the intensity ratio corresponding to the two Raman shifts of 881 cm−1 and 995 cm−1 and the H2O2 concentration with a detection limit of 0.0186 μM. This opens up a new method for the detection of H2O2 with high sensitivity and accuracy. In addition, this SERS platform was successfully used for the determination of antioxidant activity. It is promising to be applied to disease diagnosis and efficacy evaluation.

Biosynthesis and characterization of antibacterial bacterial cellulose composite membrane composed of montmorillonite and exopolysaccharides

Bacterial cellulose (BC), as a natural renewable polymer material, has the advantages of porous nanonetwork structure, high degree of polymerization, high purity, high crystallinity, excellent mechanical properties and biocompatibility. However, BC lacks antibacterial properties, which leads to the limitation of BC material in food packaging and medical materials. In this study, a new antibacterial material using the combination of montmorillonite (MMT), BC and exopolysaccharides (EPS) produced by Weissella confusa H2 was synthesized. Fourier infrared spectroscopy (FT-IR) and X-ray diffraction (XRD) analysis showed that BC-EPS, BC-MMT and BC-EPS-MMT composite membranes conformed to the typical type I cellulose structure. Compared to BC membrane, scanning electron microscopy (SEM) showed that the porosity of BC-EPS, BC-MMT and BC-EPS-MMT composite membranes was low and compact. The physical properties of BC-EPS, BC-MTT and BC-EPS-MTT composite membranes showed lower water vapor transmittance. The BC-MTT and BC-EPS-MTT composite membranes exhibit a lower swelling ratio in 120 min. The thermal properties show that BC-EPS, BC-MTT and BC-EPS-MTT composite membranes have higher thermal stability (352 °C, 310 °C, 314 °C). Additionally, both BC-MMT and BC-EPS-MMT demonstrated strong inhibitory effects against various bacterial strains, including Staphylococcus aureus, Escherichia coli, Salmonella paratyphi A, and Bacillus subtilis. The exceptional properties exhibited by composite membranes establishes them as a highly promising option in the field of food packaging and medical material applications.